ROCKARMOR GT Hoop Bullbar Combo – Toyota Hilux 2005-2011

ROCKARMOR GT HOOP BULLBAR COMBO PACK TO SUIT TOYOTA Hilux 2005-2011
Rockarmor GT Steel Hoop Bullbar (No bumper cut required)
Rockarmor 12,000 pound Winch (wireless controller & synthetic winch rope)
Rockarmor 9″ LED Phantom Spotlights – (with wiring loom and internal switch)
FITTING VIDEO BELOW
GT BULLBAR (NO BUMPER CUT REQUIRED FOR THIS VEHICLE)
Designed & tested in Australia, Rockarmor’s GT Steel Bullbar provides your vehicle with the ultimate vehicle frontal protection. Making sure air flow to the engine is maintained, the Rockarmor GT bullbar is manufactured out of 3mm steel and features a 50mm diameter cross bar which protects the full front of the vehicle against any potential animal strikes that may harm areas like your head lights, front grill and engine components.
Designed to be functional for vehicles that drive both on road & off road, the GT bullbar has been engineered to store vital accessories such as a Winch, UHF Antenna, safety flags, driving lights plus allowance of a high lift jack recovery. The design of the GT bullbar was also designed to give you maximum approach angle when offroading and enhanced your truck with a aggressive offroad look.
The GT bullbar comes complete with L.E.D fog lights, L.E.D indicators, under body stone guards and is finished with a high quality powder coat that will withstand harsh weather conditions. 100% ADR Compliant, and Air Bag approved, Rockarmor’s GT bull bar is put through a strict set of tests that gives you confidence your vehicle will be protected at all times.
Bull Bar Features:
50mm tube 3mm Steel
Bulit in recovery points
Twin high lift jack points
Twin Slotted Antenna Mounts
Winch Compatible
Winch plate & Mounting Cradle 2 in 1 System
LED indicators + Day light running light & FOG LIGHT included
Centre bash plate included
Stone guard splash plates included
Pre drilled Holes for driving lights
ADR Complied (Locally tested in Adelaide Australia)
ROCKARMOR PHANTOM 9″ LED DRIVING LIGHTS
Rockarmor’s latest innovation, the Phantom 9 Lights are rugged off-road champions designed to light up the darkest highways and remote tracks, offering unparalleled performance and durability. Built to withstand the harshest conditions, these lights are dustproof and waterproof, ensuring reliability in any environment! Experience exceptional long-distance visibility, providing you with the confidence to conquer any terrain!
TECHY STUFF
IP RATING: IP68
DISTANCE: 1 LUX @ 1400 METRES
POWER: 396 WATTS PER PAIR
LED TYPE: 33 X OSRAM LEDS
COLOUR TEMP: 6500K
LUMENS: 13,000 EFFECTIVE LUMENS
FRAME: FULLY ADJUSTABLE 60 DEGREE ALUMINIUM FRAME
LENS: POLYCARBONATE
COOLING: HIGH SPEED PASSIVE COOLING SYSTEM
DAY LIGHT RUNNING LIGHT: BUILT IN
WHATS IN THE BOX
MOUNTING HARDWARE
PHANTOM COVERS
2 X LED DRIVING LIGHTS
WIRING HARNESS WITH INTERNAL SWITCH
ROCKARMOR RECOVERY M8 12,000 Pound Winch
5 Year Manufacturers Warranty
7.2HP Motor
IP67 Rated (2 Hours Fully Submersible)
Wireless Controller (inbuilt receiver)
Controller with Extension Lead
Rockarmor Alloy Hawse Fairlead
Synthetic Winch Rope Pro Link
Control Box Mounting Bracket
Hand Saver Strap
Installation Guide Book
Specification
Line Pull: 5,443kgs / 12,000lbs
Motor: Series Wound DC12V / 7.2HP
Gear Train: 3 Stage Planetary
Gear Ratio: 216:1
Free Spooling Clutch with Rotating Gear Ring
IP67 Rated (2 Hours Fully Submersible
Installation Guide Book
Synthetic Winch Rope: 9.5mm x 28 metres
Wireless Receiver: Built into the Control Box
Isolator Switch: Built into the Control Box
Drum Size: 64mm x 224mm
Weight of Winch: 26kgs
Mounting Bolt Pattern: 254mm x 114.3mm
Dimensions: 535 X 162 X 170MM
Warranty: 5 Years Limited Electrical & Mechanical
Combo Wieght:120kg
INSTALLATION
Rockarmor New Zealand will not warrant their winch if the following are not followed:
The installation of our winches is conducted by an qualified electrician
A separate isolation switch be installed to prevent draw from the battery when not in use.
Misuse of the winch
Rockarmor New Zealand will not warrant their spotlight if the following are not followed:
The installation of our winches is conducted by an qualified electrician
Misuse of the spotlight
To comply with NZTA all daytime running lights should be installed separately to your headlights. Also note that the fog lights need to be adjusted to three degrees down.
If your vehicle’s suspension is not upgraded to withstand 60-100kgs, we do recommend that you upgrade the suspension, especially in the front of the vehicle to withstand the weight of the Steel Bumper & optional winch (if an electric winch is installed with the bull bar) If your vehicle’s suspension is not upgraded, or if you are running factory suspension, your front suspension will sag and the ride will become bumpy which can possibly lead to further damage.
We recommend when fitting the bull bar to leave a minimum 10-15mm gap between the bullbar and body of the vehicle. This will allow for movement where the chassis & body move independently.
FITTING VIDEO